How to Prepare Your Double for Transport


If you wish to disassemble your Double in order to ship or simply store it away for later use, please follow the guide below:

Breaking Down Your Double:

Step 1: If your Double's iPad is in Guided Access Mode triple click the iPad's home button and enter your passcode. If not in Guided Access Mode proceed to Step 3.



Step 2: Select end on the upper left of the screen.



Step 3: Remove the Audio Kit's microphone from the iPad's headphone jack.



Step 4: Slowly pull up and remove the Camera Kit from the iPad's lightning port and place to the side.



Step 5: Locate the opening on the bottom of the iPad Head and place your hands to push up.



Step 6: Slide out of the iPad out of the head.



Step 7:  Remove the Camera Kit's USB from the iPad Head's USB port.



Step 8: On the back of the Double's iPad Head locate the securing bolt.



Step 9: Use the supplied 3/16 hex tool to remove the securing bolt.




Step 10: Hold the dongle of the Audio Kit and lift up to remove iPad Head.




Step 11: Push down on the Audio Kit's clasp to remove.



Step 12:  Lift up on the Audio Kit's dongle and speaker and remove from the Double's pole.



Step 13:  Locate the power button on back of your Double and press and hold until the LED turns off.
If the Double's pole is extended, continue to press and hold the power button for 8-10 seconds. Let go of the power button until pole is fully lowered.





For more support, please email support@doublerobotics.com.
Last Updated: Jul 28, 2017 02:47PM PDT